Sony PCM-3348HR, Руководство по эксплуатации

Страница: 60 / 256

4-6
Chapter 4 Basic Operations of the RM-3348HR Remote Control Unit
Chapter 4
Using the MONITOR MODE CONTROL buttons
Using the MONITOR MODE CONTROL buttons
ALL REPRO button
Press and light the ALL REPRO button to set all
digital audio channels to the playback signal
monitoring state. Unless in the ALL MUTE or
REPRO MUTE state, the REPRO buttons for all
digital audio channels light.
This state ends and the ALL REPRO button goes off in
the following cases. The channels normally revert to
their individual settings.
•
When the AUTO INPUT button is pressed.
•
When the ALL INPUT button is pressed.
•
When the INDIVIDUAL button is pressed.
•
When the REPRO button or INPUT button for a
channel is pressed.
•
When the tape transport state automatically changes
while the AUTO INPUT button is lit.
•
When the channel settings are retrieved using one of
the SET UP MEMORY buttons A to D.
INDIVIDUAL button
S
1
REC
REC
READY
REPRO
INPUT
REC
REC
READY
REPRO
INPUT
2
REC MUTE
REHEARSAL
(REC DISABLE)
2CH DIO
SET UP
RECALL
ENABLE ALL
REPRO
ALL
INPUT
ALL
MUTE
REPRO
MUTE
AUTO
INPUT
X'FADE
OUTPUT
EXT
CONTROLLED
AUTO REC
ANALOG
MONITOR
B C D STORE INDIVIDUAL A
SET UP MEMORY MONITOR MODE CONTROL X'FADE TIME
DIGITAL AUDIO REMOTE CONTROL UNIT RM-3348HR
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 TIME
CODE
TIME
CODE
A1 A2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 A1 A2
ALL INPUT button
ALL REPRO button
ALL INPUT button
Press and light the ALL INPUT button to set all digital
audio channels to the input signal monitoring state.
Unless in the ALL MUTE state, the INPUT buttons for
all digital audio channels light.
This state ends and the ALL INPUT button goes off in
the following cases. The channels normally revert to
their individual settings.
•
When the AUTO INPUT button is pressed.
•
When the ALL REPRO button is pressed.
•
When the INDIVIDUAL button is pressed.
•
When the REPRO button or INPUT button for a
channel is pressed.
•
When the tape transport state automatically changes
while the AUTO INPUT button is lit.
•
When the channel settings are retrieved using one of
the SET UP MEMORY buttons A to D.
Reverting to the individual settings
To return to the previous individual settings for the
channels when the ALL REPRO or ALL INPUT
button is lit, press the INDIVIDUAL button.
4-1 Audio Control