Sony PCG-SRX99K VAIO User Guide (primary manual) Скачать руководство пользователя страница 66

Страница: 66 / 217

Combinations and functions with the Fn key

If you switch user identities during a computing session, the Fn+F7 key functionality (if available on your computer) will

be interrupted. To switch to an external display or monitor, see

Selecting a Display Mode

for more information.

Combinations/

Feature

Function

Fn +

(F3)

Mute On/Off

Toggles the built-in speaker off and on.

Fn +

(F4)

Speaker volume

Adjusts the built-in speaker volume. An on-screen display appears notifying you when a change

occurs.

To increase volume, press

, then

To decrease volume, press

, then

Fn +

(F5)

Brightness control

Adjusts the brightness of the LCD.

To increase light intensity, press

and then

To decrease light intensity, press

and then

Fn +

(F7)

Switch to the external monitor/LCD

Toggles between the LCD, a connected external display, and both the LCD and

external display.

Select one display at a time to playback DVDs. Connect the cable before you turn on the computer, otherwise Fn+F7 will not
work.

Fn +

(F12)

Hibernate

Provides for the lowest level of power consumption. When you run this command, the state of the

system and state of the peripheral devices are written to the hard disk and the system power is turned off. To return the
system to its original state, use the power button to turn on power.
Fn + Esc
Standby

Puts the system into Standby mode, a power management state. To return the system to the active

state, press any key or press the power button.
Fn + E

Ejects the CD.

Fn + B
Bass Boost

Toggles the bass-boost function off and on. This feature is available only while using headphones.

You can also carry out these functions using the Jog Dial Control. Some functions are not available until the Windows

operating system launches.

Page 66

Содержание PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Результаты поиска

Содержание PCG-SRX99K VAIO User Guide (primary manual)

Отзывы:

Sony PCG-SRX99K VAIO User Guide (primary manual), Руководство пользователя, Страница: 66 / 217

Результаты поиска

Содержание PCG-SRX99K VAIO User Guide (primary manual)

Отзывы: