Sony PCG-SRX99K VAIO User Guide (primary manual) Скачать руководство пользователя страница 111

Страница: 111 / 217

Notes on connecting an i.LINK device



Do not connect more than one digital video camera recorder at a time. The software supplied with your computer
will not recognize multiple cameras.



Do not connect an external device that requires power from the i.LINK port. The i.LINK port cannot supply power to
the external device.



The computer supports transfer rates up to 400 Mbps; however, the actual transfer rate is the lowest transfer rate
of the external device.



The i.LINK features available may vary depending on the software applications you use. See the documentation that
accompanied your software for more information.

Page 111

Содержание PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Результаты поиска

Содержание PCG-SRX99K VAIO User Guide (primary manual)

Отзывы:

Sony PCG-SRX99K VAIO User Guide (primary manual), Руководство пользователя, Страница: 111 / 217

Результаты поиска

Содержание PCG-SRX99K VAIO User Guide (primary manual)

Отзывы: