Sony PCG-SRX99K VAIO User Guide (primary manual) Скачать руководство пользователя страница 12

Страница: 12 / 217

Notes on batteries



Never leave the battery in temperatures above 140° F (60° C), such as under direct sunlight or in a car parked in
the sun.



While the battery is in use or being discharged, the battery heats up. This is normal and is not cause for concern.



Keep the battery away from all sources of heat.



Keep the battery dry.



Do not open or disassemble the battery.



Do not expose the battery to any mechanical shock.



Battery life is shorter in a cold environment because of decreased battery efficiency at low temperatures.

Page 12

Содержание PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Результаты поиска

Содержание PCG-SRX99K VAIO User Guide (primary manual)

Отзывы:

Sony PCG-SRX99K VAIO User Guide (primary manual), Руководство пользователя, Страница: 12 / 217

Результаты поиска

Содержание PCG-SRX99K VAIO User Guide (primary manual)

Отзывы: