Sony PCG-SRX99K VAIO User Guide (primary manual) Скачать руководство пользователя страница 181 | Manualshive

Страница: 181 / 217

background image

Legal Information

SONY ELECTRONICS INC. PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION.
IN NO EVENT SHALL SONY ELECTRONICS INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE
SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any
time without notice. The software described herein is governed by the terms of a separate user license agreement.

This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms
and conditions of license agreements enclosed with this product. Some of the software may not be transported or used
outside the United States. Software specifications are subject to change without notice and may not necessarily be
identical to current retail versions.

Updates and additions to software may require an additional charge. Subscriptions to online service providers may require
a fee and credit card information.

Certain software product(s) included with this computer may include features such as copy protection and content
management technology.

USE OF THE SOFTWARE PRODUCT(S) REQUIRES AGREEMENT TO APPLICABLE END USER AGREEMENTS AND FULL COMPLIANCE
WITH APPLICABLE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and privacy policies will be detailed
during initial launch of the software product(s), or upon certain reinstallations of the software product(s) or reconfigurations
of the computer, and may be completed by Internet or telephone (toll charges may apply).

© 2002 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved.
Sony, VAIO, the VAIO logo, DVgate, Handycam, MovieShaker, i.LINK, ImageStation, Net MD, Network Walkman, MagicGate,
Memory Stick, MICROMV, OpenMG, SonicStage, Giga Pocket, Click to DVD, PictureGear, and ATRAC3 are trademarks or
service marks of Sony. Microsoft, Windows, and Windows Media are trademarks or registered trademarks of the Microsoft
Corporation.

All other trademarks are trademarks or registered trademarks of their respective owners.

Page 181

«
...
179
180
181
182
183
...
»

Содержание PCG-SRX99K VAIO User Guide (primary manual)


























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PCG-SRX99K VAIO User Guide (primary manual)

Бренд: IBM Страницы: 170

Бренд: IBM Страницы: 257

Бренд: IBM Страницы: 63

Бренд: Gateway Страницы: 164

Бренд: Zotac Страницы: 28

ZBOX EDGE MI623

Бренд: Zotac Страницы: 21

Бренд: Steinberg Страницы: 820

EBOX-3310MX-S4C

Бренд: DMP Electronics Страницы: 41

Бренд: Clarke Страницы: 8

Бренд: Amiga Страницы: 113

Бренд: Uplift Desk Страницы: 2

Бренд: Asus Страницы: 54

Бренд: Asus Страницы: 70

AAEON BOXER-6710

Бренд: Asus Страницы: 75

Бренд: Asus Страницы: 70

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 64

Бренд: Asus Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды