![background image](http://html.mh-extra.com/html/sony/nas-z200dir/nas-z200dir_operating-instructions-manual_1330164073.webp)
NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
GB
Precautions/Specifica
tions
3
Secure the Base Plate to the wall using 4 or more 6 mm diameter or equivalent
screws (not supplied).
Select 4 screw holes with the
mark shown in the diagram below and tighten the screws securely so
that they will not become loose.
Secure the Base Plate so that it is level.
Base Plate
WARNING
The screws required for this procedure are not supplied. Select screws suitable for the material and structure of
the wall.
If the Base Plate cannot be attached securely enough, use additional screws.
Be sure to confirm that the Base Plate is securely attached to the wall.
4
Detach the stand from the unit.
Remove the 2 screws that secure the stand from the unit.
Push the 2 tabs located on the bottom of the stand, and pull up the stand to detach from the
unit.
Soft cloth
Note
Do not remove the stand for any reason other than to wall-mount the unit.