NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
2
GB
DAB display
Station name
Channel Label and frequency
DLS (Dynamic Label Segment)
Ensemble Label
To reduce static noise during
reception of a weak FM stereo
station
If you experience noise in an FM stereo broadcast,
press OPTIONS to enter the Options menu and
select [Tuner Setting] – [FM Mode] – [Monaural].
The reception will no longer be stereo, but it will
be clearer. To change back to stereo reception, do
the same procedure and select [Auto].
Tip
For better broadcast reception, try changing the direction
or location of the antenna. For example, position the
antenna near or outside a window. If the reception does
not improve, it is recommended to connect an optional
external antenna. Keep the FM and AM antennas away
from the power cord, remote control, remote control
charger, AC power adaptor and USB cable to avoid
picking up noise.
Notes
When tuning in a DAB station, it may take a few
seconds before you hear any sound.
When tuning in a DAB station, primary service is
automatically received when secondary service ends.
To perform DAB Automatic Scan*
1
Select the Tuner function from the
Home menu.
2
Select [DAB].
3
Press Options to enter the Options
menu.
4
Select [Tuner Setting] – [Auto Scan].
5
When “Starting Automatic Scan.”
appears, select [OK].
DAB Automatic Scan starts.
When scanning is completed, a list of available
DAB stations is created.
Notes
All preset stations that have been stored in the unit are
cleared when you perform a DAB Automatic Scan or
when scanning is cancelled.
Before unplugging the DAB wire antenna, make
sure the unit is turned off to preserve your own DAB
settings.
* For the UK model only
