Sony MG40 Series, Справочник по командам

Страница: 132 / 140

5-2
(E)
MG40 Series
<Comparator results>
Th e comparator results are expressed as 2-digit integers from 00 to 16 depending on the number of
levels set.
0 : Measurement value < Setting value 1
1 : Setting value 1 Measurement value < Setting value 2
2 : Setting value 2 Measurement value < Setting value 3
.
.
.
15 : Setting value 15 Measurement value < Setting value 16
16 : Setting value 16 Measurement value
<Output data>
Th e type of data which is output is indicated by a letter of the alphabet.
C : Current value A : Maximum value I : Minimum value P : P-P value B : ABS value
<Error information>
Th e axis error information is indicated using a hexadecimal 1-digit bit pattern.
7 6 5 4 3 2 1 0
Reserved (always zero) Level alarm Speed alarm
0 : No error, no alarm
1 : Speed alarm is occurring.
2 : Level alarm is occurring.
3 : Speed alarm and level alarm are occurring.
<Reference point information>
Th e reference point detection status is indicated using a hexadecimal 1-digit bit pattern.
0 : Reference point not detected
1 : Wait to go past reference point
2 : Reference point detected
Th e data is output at the resolution set for the output resolution using signed 7-digit data with a decimal
point and with zeros suppressed.
A space is used as the plus sign when a value is positive.

123.4567

1 2 3 . 4 5 6 7
0.2900
0 . 2 9 0 0
When the measuring unit is in the speed alarm or level alarm status, the “Error” characters are output
until reset is initiated.
Error
E r r o r
If the measuring result data consist of more than 7 digits, “F” is output as the highest-level digit to indicate
that an overfl ow has occurred. Use in a range where an “F” will not be output.
When

1000.2531 is to be displayed

F 0 0 . 2 5 3 1