Sony MG40 Series, Справочник по командам

Страница: 100 / 140

4-12
(E)
MG40 Series

Latch
Th is function is used for the display latch-related settings and acquisition.
Th e latch status cannot be established during pause; nor can the pause status be established during latching.
Use the memory data output command for the output of the data in the latch status. Th e data request
command cannot be used.
Set latch
Ethernet CC-Link
Measurement
mode
The command sets the latch status.
Command format
LCH Designated axis =<Setting value>
<Setting value> 0 : Off (Factory setting)
1 : On
Return format Execution results
Target Single axis, MG42 hub unit, all axes
Save setting values Setting values not saved.
Examples of use Transmission :
LCH[00

]=1
(Set latch for all the axes for the MG41 main unit.)
Return : OK000 (Successfully completed.)
Compatible command None
Acquire latch status
Ethernet CC-Link
Measurement
mode
The command acquires the current latch status.
Command format
LCH Designated axis ?
Return format LCH Designated axis =<Setting value>
<Setting value> 0 : Off
1 : On
Target Single axis
Examples of use Transmission :
LCH[00A]?
(Acquire the latch status of axis A for the MG41 main unit.)
Return : LCH[00A]=1 (Latch “On” status)
Compatible command None
Latch On
(Compatible command only)
Ethernet CC-Link
Measurement
mode
The command establishes the latch status.
Command format
None
Return format Execution results
Target Single axis, MG42 hub unit, all axes
Examples of use Transmission :
[31

]LCHON
(Set latch to “On” for all the axes for the MG42 hub unit ID31.)
Return : OK000 (Successfully completed.)
Compatible command Designated axis LCHON
Latch Off
(Compatible command only)
Ethernet CC-Link
Measurement
mode
The command releases the latch status.
Command format
None
Return format Execution results
Target Single axis, MG42 hub unit, all axes
Examples of use Transmission :
[01

]LCHOFF
(Set latch to “Off ” for all the axes for the MG42 hub unit ID01)
Return : OK000 (Successfully completed.)
Compatible command Designated axis LCHOFF