Sony MG40 Series, Справочник по командам

Страница: 128 / 140

4-40
(E)
MG40 Series

Data transmission port number
Th is function is used to set the number of the port which is to be used by the data interface.
With internet, since port numbers 1 to 1023 are generally used by regular internet services and port
numbers 1024 to 49151 may have already been registered, 49152 or a higher number is usually used as the
port number.
However, this does not apply for a network operating inside a company so the MG40 series supports all
the port numbers in the range of 1 to 65535 under the IP standards with the exception of numbers 20, 21,
23 and 80.
When an error occurs in the setting command, it may be that the port number concerned cannot be used,
so try a diff erent port number.
Set
Setup
mode
Ethernet
The command sets the number of the port which is to be used by the data interface.
Command format
NPN=<Value>
<Value> 1 to 65535 (with the exception of numbers 20, 21, 23, 80, 52023 and
52024) (Factory setting: 49154)
Return format Execution results
Target MG41 main unit
Save setting values Setting values saved.
Examples of use Transmission :
NPN=49153
Return : OK000
Compatible command None
Acquire
Setup
mode
Ethernet
Measurement
mode
The command acquires the number of the port used by the data interface.
Command format
NPN?
Return format NPN=<Value>
<Value> 1 to 65535 (with the exception of numbers 20, 21, 23, 80, 52023 and
52024)
Target MG41 main unit
Examples of use Transmission :
NPN?
Return : NPN=49153
Compatible command None