5-28 (E)
Digital Cinema Dual System
5-8-4. Position Adjustment (Adjusting the Projector Tilt and Direction)
In the case that the V shift amount is insufficient, adjust the length of foot in the rear portion of the projec-
tor to tilt the projector. (Refer to Section 2-6.)
In the case that the H shift amount is insufficient, change the projector installation position in order to
project the image obliquely.
Perform the mask processing because a keystone occurs when the projector is tilted.
Mask processing
1. Tap the “Configuration” tab.
2. Tap
[Projector|$2D%]
→
[Set|Function]
.
The Set Function screen is displayed.
3. Tap
[Masking|Adjust]
.
The Adjust Masking screen is displayed.
4. Adjust the masking amount.
Tap the adjustment point and adjust H Adjust and V Adjust using the slide bar or
[+][_]
.
.
[+]
: Setting value is increased.
.
[_]
: Setting value is decreased.
Tap
[Reset]
to return to the original masking amount.
5. Tap
[Close]
to close the Adjust Masking screen.
Screen example
[Set|Function]
[Masking|Adjust]
[Projector|$2D%]
Screen example
[+][_]
[Reset]
[Close]
