2-23 (E)
Digital Cinema Dual System
2-8. Installation of 3D Filter and Holder (LKRA-011)
n
Before installing the 3D filter and holder (LKRA-011), check that the lens adjustment (screen adjustment)
of the two projectors is completed.
Attach the 3D filter and holder (LKRA-011) to the main projector and sub-projector.
They can be attach to the main projector and sub-projector in the same procedure. Here, the example of
procedure when attaching to the main projector is described.
In the standard installation, the 3D filter can be opened/closed in the left direction. When you want to
open/close the 3D filter in the right direction depending on the installation environment, attach the 3D
filter and holder with the lock pin located on the underside.
2-8-1. Component Parts
The 3D filter and holder consist of the following parts.
.
Hexagonal spacer:
8 pcs
.
Spring washer:
8 pcs
.
Washer:
8 pcs
.
PSW cross recessed hexagon head bolt: 8 pcs
.
3D filter:
2 pcs
.
3D filter bracket assembly:
2 pcs
.
PSW4
x
8:
8 pcs
Required tools
.
Long screwdriver (Phillips-head)
.
Socket wrench (subtense: 13 mm)
Tightening torque
Tighten the following screws with the tightening torque described below.
.
Hexagonal spacer (M8, subtense: 13 mm): 12.5
?
1.0 N
.
m
.
M8
x
25 (subtense: 13 mm):
10.0
?
1.0 N
.
m
.
PSW4
x
8:
1.40
?
0.20 N
.
m
.
PSW4
x
10:
1.40
?
0.20 N
.
m
.
PSW5
x
12:
3.00
?
0.20 N
.
m
When using the torque driver with the notation of cN
.
m, interpret it as follows.
Example: 0.8 N
.
m = 80 cN
.
m
Standard installation
When opening/closing in the right direction
