5-15 (E)
Digital Cinema Dual System
.
In the case of placing a check in “Synchronized with SMS Server”:
The clock inside the server (Secure Clock) is set being synchronized with the clock on the screen
(SMS Server Time).
.
In the case of placing a check in “Force limitless clock setting”:
The current date and time of SMS Server is displayed. To change “Date” and “Time”, it is required
to type the password.
t
When setting the time that is different from the current time by 6 minutes or more, it is required to
place a check in “Force limitless clock setting” and enter the password. If the password is not entered,
an error is displayed when the
[Apply]
is tapped.
7. Set “Time Referenced” as required.
.
In the case of placing a check in the “Synchronized with IMB” radio button:
The clock on the screen (SMS Server Time) is set being synchronized with the clock inside the
server (Secure Clock Time).
.
In the case of placing a check in the “Synchronized with NTP Server” radio button:
The clock on the screen (SMS Server Time) is set being synchronized with the clock of the NTP
server (NTP Secure Time).
“NTP Server” can be entered. The IP address of NTP Server can be entered.
8. Tap
[Apply]
.
9. When “Time Zone” is changed, restart the system manually.
5-4-5. High Altitude Mode Setting (Cooling Setting)
When using this system in high altitude areas, it is required to set the mode according to the altitude. If
the setting is not performed correctly, the lamp performance is degraded, which may remarkably increase
the failure frequency of lamp and shorten the life of devices.
To set the mode, it is required to change the ini file stored in the server.
For details on how to change the ini file, refer to Section 5-13-1.
The factory setting is 1 (0 to 499 m).
1. Enter the “ini” file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the line below.
com.sony.dcinema.projector.CoolingSetting=
1
Add the bold-faced portion as described below according to the following table.
Altitude (m)
Value to be input
0 to 499
1
500 to 999
2
1000 to 1999
3
2000 to 2999
4
3000 or more
5
3. Save the changed contents and end the registration. (Refer to steps 6 to 8 in Section 5-13-1.)
n
When the 450 W lamp (LKRM-U450) is used at an altitude of 1500 m or higher, the guaranteed time is
changed.
For details, contact your local Sony Sales Office/Service Center.
