6-9 (E)
Digital Cinema Dual System
Adjust the camera’s position so that the red frame (center frame) near the center of the LCD panel
display appears within the approximate center of the screen. When the center frame is adjusted to the
screen center, the zoom is adjusted automatically.
If a blinking yellow frame (target frame) appears in the LCD panel display, make fine adjustments to
the calibration camera’s position so that the screen fits within the frame.
After the zoom process is properly completed, the following screen appears.
5. Verify that the four areas in the test pattern displayed on the calibration camera are not significantly
askew.
If they are significantly askew, make fine adjustments to the calibration camera’s position to achieve
proper horizontal and vertical alignment.
If you want to move the calibration camera or otherwise retry the adjustment process, tap F1 [QUIT].
6. Tap F3 [START].
A L I G N M E N T > A D J
Q U I T
S T A R T
C A M E R A A D J U S T M E N T
D O N E !
S T A R T C A L I B R A T I O N ?
A L I G N M E N T > A D J
Q U I T
S T A R T
C A M E R A A D J U S T M E N T
D O N E !
S T A R T C A L I B R A T I O N ?
