5-2 (E)
Digital Cinema Dual System
5-1-1. Startup and Login
Turn on the power switch of the main projector and sub-projector, then start the server. Login to the
system with the username “trsetup”. You can turn on the main power of either projector first, main projec-
tor or sub-projector.
1. Set the power switch on the rear of the projector to ON (I) to turn on the main power.
When the projector becomes standby state after the power is turned on, the MAIN indicator, LAMP
indicator, and IMB indicator light up in red.
n
If the MAIN indicator does not light up in red even though the power switch is set to ON, an error
may have occurred in the standby power supply.
Identify the problem portion by referring to Section 2-11 in the Service Manual of the Digital Cinema
Projector Package SRX-R515P/R510P.
2. Push the SYSTEM SW switch on the front of the server to turn on the power.
The POWER indicator lights up in green. When the server is started, the “Login” screen is displayed
on the monitor.
3. Login to the system with the username “trsetup”.
Touch the “User ID” input column on the login screen and type “trsetup” from the software keyboard.
Type “setup” in the “Password” input column and tap
[Login]
.
Example of Login screen
Power switch
Projector
Server
Touch panel monitor
SYSTEM SW switch
Power switch
MAIN indicator
IMB indicator
LAMP indicator
POWER indicator
Main projector
Sub-projector
MAIN indicator
IMB indicator
LAMP indicator
