68
Chapter 6 Using the Library Administration Menu
Bar Code
Set whether or not to read the bar code affixed to the cartridge.
If “Disable” is selected, the bar code will not be read.
3
Click “Submit”.
The library is configured.
Network
In “Network”, network-related settings can be configured. After configuring,
the AIT library must be restarted.
Note
The network settings can also be configured with the Network Menu of the
control panel.
1
Click “System Configuration” on the Library Administration Menu, then
click “Network”.
The page to enter the password appears.
2
Enter “LIB-162A” in the “Password” box, then click “OK”.
Note
Each access to the “Network” requires the password to be entered. When the
device is shipped from the factory, the password is set to “LIB-162A” as the
default.
