33
Chapter 3 Basic Usage
Viewing the Status Display
During the normal active state, the status information is displayed on the LCD
panel of the AIT library.
A
Current operation of the library
The meanings of the messages displayed are as follows:
“READY”:
Waiting
“PICK”:
The picker has gone after the cartridge
“MOVE”:
The cartridge is moving
“PUT”:
The cartridge is being set to the AIT drive or slot
B
Type of the AIT drive
The drive type of AIT drive 1 (R) is displayed on the top and that of AIT drive
2 (L) is displayed on the bottom. Make sure that the types of both drives are the
same. When setting cartridges, check this display and make sure the cartridges
are of the same type.
C
Setting the condition of the cartridges
If cartridges are set in the AIT library and AIT drives, the numbers of the
corresponding slots and drives are displayed in reverse video.
D
Condition of the AIT drives
If a cartridge is set in the AIT drive,
is displayed.
If a cartridge is not set in the AIT drive, a dotted line is displayed.
(Example) If cartridges are set in slots 1 and 16, and Drive 1 (R) and
2 (L)
E
Picker
When the picker is not holding a cartridge,
is displayed.
When the picker has picked up and is conveying a cartridge,
is displayed.
Note
The status information can be viewed through a browser. Refer to Chapter 6,
“Library Administration Menu” (page 63).
READY
AIT2
AIT2
D1
D2
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
READY
D1
D2
1
2 3 4
5 6 7 8
9 10 11 12
13 14 15
16
AIT2
AIT2
