8
Features and Functions
Ch
apt
er 1 Int
ro
duc
tion
C
(Soft Keyboard) button
Use this button to display the soft keyboard that is used
for text input.
D
PRESET button
Use this button to move the camera to a preset
position.
E
+ / – (Camera Number) Button
Use these buttons to switch between cameras for
selection.
Press the [+] button to select the next camera number,
and the [–] button to select the previous camera
number.
F
(2 × 2 Layout) button
This button switches the screen layout to 2 × 2 (4
screen).
G
(1 × 1 Layout) button
This button switches the screen layout to 1 × 1 (1
screen).
H
Numeric keys
Use these keys to input numbers.
I
Operation selection buttons
Use these buttons to select items.
V
button
Use this button to move the focus cursor upwards in
order to select an item that is higher on the screen.
B
button
Use this button to move the focus cursor to the left in
order to select an item that is located to the left on the
screen.
v
button
Use this button to move the focus cursor downwards in
order to select an item that is lower on the screen.
b
button
Use this button to move the focus cursor to the right in
order to select an item that is located to the right on the
screen.
ENTER button
Use this button to confirm the selection of the current
item or monitor frame, and to execute other
operations.
Before using the infrared remote control
unit
Remove the insulating sheet.
Replacing the lithium battery in the infrared
remote control unit
The infrared remote control unit uses a standard CR2025
lithium battery. Do not use any battery other than the
CR2025.
1
While holding down the locking lever (
1
), pull the
battery holder out (
2
).
2
Insert the battery with the “+” side facing up (
1
) and
then push the battery holder in until it clicks into
place (
2
).
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
When you dispose of the battery, you must obey the law in
the relative area or country.
Battery replacement interval
When the lithium battery becomes weak, the unit may not
respond even when the buttons are pressed. The average
life of a lithium battery used in this unit is one year, but this
will vary according to how frequently the unit is used. If
the main unit does not respond when buttons on the remote
control are pressed, replace the battery and try the
operation again.
Insulating sheet
“+” side faces up
Содержание Ipela NSR-S10
Страница 67: ......