Sony Ipela NSR-S10, Руководство пользователя

Страница: 43 / 67

43
Camera Setting
Cha
p
te
r 4
De
tai
led Des
c
ript
ion
s
of
Set
tings
and
Wi
ndo
ws
“Camera Setting” Screen Details
“Camera Settings” Screen
A
Camera ID
Select the camera for which the settings are being made.
Selecting a camera ID causes the image from that camera
to appear in the preview area on the right side of the screen.
All
Sets for all cameras.
If the [All] check box is selected, images from the
cameras cannot be previewed.
B
Camera
You can set image display, enable/disable audio input, set
the camera name, etc.
Display
Select the check box to display the image from the
camera.
If you deselect the [Display] check box for a camera,
you will not be able to monitor images from that
camera. If no image is displayed from a given camera,
check to make sure that the [Display] check box for
that camera is selected.
Enable Audio
Select the check box to acquire audio from the camera.
Name
Enter the camera name.
Use only alphanumeric characters and symbols
(excluding \ / : * ? " < > |).
Description
Enter the camera description.
C
IP Camera Information
This section allows you to set the camera IP address, image
quality, sensor input, relays, etc., and to confirm
information concerning the camera.
IP Setting
This displays “IP Camera Settings” screen (page 43) .
On the “IP Camera Settings” screen, you can change
the IP address of cameras, locate Sony network
cameras that are connected to the same network, etc.
Details
This displays “Advanced IP Camera Setting” screen
(page 44) .
On the “Advanced IP Camera Setting” screen, you can
set the image quality and make sensor input settings,
relay settings, etc.
Model
The camera model is displayed.
IP: Port
The IP address and port number of the camera are
displayed.
MAC Address
The MAC address of the camera is displayed.
D
Default
This restores the default settings.
“IP Camera Settings” Screen
This screen is displayed by clicking [IP Setting] in the
“Camera Setting” screen.
Protocol
Select when connecting to the camera via a protocol.
If this is selected, select the protocol to be used from the
drop-down list.
Model
Select the camera model.
IP Camera Site
Enter the IP address and port number for the camera.
MAC Address
The MAC address of the camera is displayed.
Caution
A
B
C
D