Sony Giga Juke NAS-SC500PK Скачать руководство пользователя страница 128

Страница: 128 / 203

NAS-SC500PK.GB.4-114-863-

(1)

128

Restoring backed up data

You can restore the back up data in the external

USB hard disk to the HDD of the unit.

Use an USB cable to connect the USB

hard disk to the USB port of the unit.

Enter the Settings menu and select

[Backup].

Select [Restore backup data].

A confirmation window for the restoration

appears.

Note

Even if you change to the system information

display, the total number of tracks cannot be

displayed at this time.

Select [Start restoring].

The unit connects to the Internet and

the audio data is confirmed. After the

confirmation is completed, the unit starts

restoring the audio data to the HDD.

When the restoration is finished, “Restored

backup data normally.” appears.

If you select [Cancel] while a restoration

is in progress, the restoration operation is

cancelled.

To format a USB hard disk

Enter the Settings menu and select

[Backup].

The back up setting display appears.

Enter the Options menu and select

[Format USB-HDD].

A confirmation window appears.

Confirm the displayed item and keep

selecting [Yes] after that.

The unit starts formatting the USB hard disk

drive. When the unit finishes formatting,

“Formatted USB hard disk normally.” appears.

Select [Complete].

The back up setting display reappears.

Notes



When you cancel a restoration operation, the audio

data restored to the HDD of the unit remains

incomplete and may cause the unit to malfunction.

To avoid this, perform the restoration operation again

until it is completed.



A formatting operation cannot be cancelled once it has

begun.



A USB hub cannot be used between the unit and an

external device.



Sony cannot guarantee trouble-free operations when

using a USB extension cable or the supplied wireless

adaptor extension cable to restore backed up data.



Make sure not to disconnect the USB cable or turn off

the unit while a restoration operation is in progress.

Doing so may cause the unit to malfunction.

Checking system information

You can view information regarding the system,

such as the remaining space on the HDD, the

version number of the application and the version

of the system’s microcomputer.

Enter the Settings menu and select

[System info].

Tip

The remaining space on the HDD is the actual space

available for storing audio data. At full capacity, it is about

142 GB.

Содержание Giga Juke NAS-SC500PK












































































































































































































Результаты поиска

Содержание Giga Juke NAS-SC500PK

Отзывы:

Бренды по названию

Популярные бренды

Sony Giga Juke NAS-SC500PK, Руководство по эксплуатации

Результаты поиска

Содержание Giga Juke NAS-SC500PK

Отзывы:

Бренды по названию

Популярные бренды