ENTER button.
ON:
Records movies with the GPS log or still images with location information.
OFF:
Does not use GPS log.
BACK:
Returns to the [GPS] menu.
Checking triangulating status
The indicator changes according to the strength of GPS signal reception when GPS is
activated.
No indicator (OFF):
The GPS log is set to [OFF] or an error occurred.
(Searching/Difficult):
Your camera is searching for GPS satellites. (It may take
several minutes to start triangulating.)
(Triangulating):
Your camera is receiving a GPS signal. (Your camera can record
location information.)
About GPS assist data
The time for the GPS acquiring location information can be shortened by taking in GPS
assist data. If connection via Internet is made using the software, Action Cam Movie Creator,
the GPS assist data can be updated automatically.
If the Date & Time Setting is not set, or set time is shifted greatly, the time for the GPS
acquiring location information cannot be shortened.
If the term of validity of GPS assist data has run out, the time for the GPS acquiring
location information cannot be shortened.
Using the support tool
You can also update the GPS assist data by inserting a memory card into the computer.
Display the camera setting’s screen of Action Cam Movie Creator, select “Update GPS
Assist Data” - the desired memory card drive to be installed on your computer, and then
update the GPS assist data. If you insert this memory card into the camera, the GPS assist
data will be reflected on the camera.
Note
GPS log is recorded only when recording movies. When you shoot still images, only the
location information is recorded.
If you do not record the location information, set the GPS log to [OFF].