press the ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
RESOL:
Sets the output resolution of the HDMI signal.
AUTO: Sets the HDMI resolution signal automatically.
2160p (FDR-X1000V only): Sets the HDMI resolution signal to 2160p.
1080p: Sets the HDMI resolution signal to 1080p.
1080i: Sets the HDMI resolution signal to 1080i.
720p: Sets the HDMI resolution signal to 720p.
BACK: Returns to the [HDMI] menu.
24/60:
Sets the output HDMI signal frame rate.
60p: Output HDMI signal is 60p.
24p: Output HDMI signal is 24p.
BACK: Returns to the [24/60] menu.
*
Available only when in movie mode (not available when playback).
*
This setting is disabled when VMODE is set to a setting other than 1080 24p.
*
This setting is disabled when the HDMI resolution is set to a setting other than 1080.
TCOUT:
Sends the time code or the user bit information to a device connected with
HDMI.
ON: Sends the time code or user bit information.
OFF: Does not send the time code or user bit information.
BACK: Returns to the [TCOUT] menu.
*
Unavailable when [V.FMT] is set to [MP4].
R.CTL:
Controls the recording on a device connected with HDMI.
ON: Controls the recording on the device.
OFF: Does not control the recording on the device.
