Sony DVW-500/1, Руководство по эксплуатации

Страница: 94 / 169

5-8
Chapter 5 Recording/Playback
5-4 Playback
Chapter 5 Recording/Playback
5-4-2 Variable Speed Playback in
Jog/Shuttle/Variable Modes
In Jog/Shuttle/Variable modes, you can change the
playback speed as follows:
Jog mode: The playback speed corresponds to the
rotational speed of the search dial, ranging from
–1 to +1 or –3 to +3 times normal playback speed
(selectable in VTR SETUP menu).
Shuttle mode: The playback speed corresponds to
the angle of rotation of the search dial, ranging
from –50 to +50 times normal speed when
playing back a Digital Betacam tape, and –35 to
+35 (DVW-A500/1 and 500/1 only) or –42 to +42
(DVW-A500P/1 and 500P/1 only) times normal
speed when playing back an analog Betacam tape.
Variable mode: Playback speed is –1 times normal
speed when the search dial is rotated fully
counterclockwise, and +3 times normal speed
when rotated clockwise.
Jog mode playback
Follow the procedure below to play back in jog mode.
Jog mode playback
1
Press the search dial or the JOG button so that the
JOG button lights up.
Pressing the dial toggles the VTR between jog
mode and shuttle mode. Either the JOG or
SHUTTLE button lights up to indicate the current
mode.
The
p
indicator lights up and the VTR enters still-
picture mode.
2
Rotate the search dial in the desired playback
direction and to the desired angle.
The tape is played back slowly, at a speed
corresponding to the rotational speed of the search
dial. A direction indicator (
“
or
”
) lights up to
indicate the direction of playback.
3
Stop rotating the search dial to stop jog mode
playback.
The
p
indicator lights up.
Note
The VTR is factory set so that pressing the search dial
switches the VTR between jog and shuttle modes,
however, you can set the VTR so that this function is
disabled.
For details on switching the search dial functions, refer
to“1-11. SEARCH DIAL MODE SWITCHING” in the
Installation Manual.
Shuttle mode playback
Follow the procedure below to play back in shuttle
mode.
Shuttle mode playback
1
Press the search dial or the SHUTTLE button so
that the SHUTTLE button lights up.
Pressing the dial toggles the VTR between jog
mode and shuttle mode. Either the JOG or
SHUTTLE button lights up to indicate the current
mode.
The
p
indicator lights up and the VTR enters still-
picture mode.
After turning on the VTR, you should always set
the search dial to its center position. (The
p
indicator, however, lights up when the VTR is
turned on, no matter what the position of the search
dial is.)
1,2,3
1
1,2,3 3
1