background image

Chapter 6

Editing

6-5

Chapter 6  Editing

Setting edit points with the numeric buttons

Setting edit points with the numeric buttons

1

Press the appropriate INSERT button in HOME
menu (

[F4]

 (INS TC), 

[F5]

 (INS VIDEO),

[F6]

 (INS A-CH1), 

[F7]

 (INS A-CH2), 

[F8]

 (INS A-

CH3), 

[F9]

 (INS A-CH4), 

[F10]

 (INS CUE)).

2

Press the RECORDER or PLAYER button to select
the VTR for which edit points are to be set.
The button lights up.

3

Enter the edit point data with the numeric buttons.
For example, to enter 01H00M30S00F, press 1, 0,
0, 3, 0, 0, 0.  (The leading 0 is not required.  When
the entered value is less than eight digits, the
leading digit(s) are set to 0 when you press the SET
button.)

To delete entered data

Press the CLR button.

(Continued)

Split editing

Positioning and setting edit points

Split editing allows you to set edit points separatelty
for video and audio.  Set audio edit points with the
AUDIO IN/OUT buttons and video edit points with
the IN/OUT buttons.
Split editing, however, can only be done when the
recorder VTR is in insert mode.

Positioning and setting edit points

1

Press the appropriate INSERT button in HOME
menu (

[F4]

 (INS TC), 

[F5]

 (INS VIDEO),

[F6]

 (INS A-CH1), 

[F7]

 (INS A-CH2), 

[F8]

 (INS

A-CH3), 

[F9]

 (INS A-CH4), 

[F10]

 (INS CUE)).

2

Press the RECORDER or PLAYER button to
select the VTR for which edit points are to be set.
The button lights up.

3

To locate the edit points, rotate the search dial in
jog or shuttle mode.

For details on jog/shuttle/variable playback modes,
refer to “5-4-2 Variable Speed Playback in Jog/Shuttle/
Variable Modes” on page 5-8.

4

Press the IN (OUT, AUDIO IN or AUDIO OUT)
button while holding down the ENTRY button.

5

Repeat Steps 

2

 to 

4

 to set the remaining edit

points.

1

2

4

3

CLR button

4

1

3

2

Input data
are displayed.

Å I N   0 0 : 0 0 : 0 0 : 0 0   Å O U T   0 0 : 0 0 : 0 0 : 0 0

                              L O C K

D O L B Y

 

N R

P R E

R E Å D

o f f

C H . C O N D

G R E E N

DIGITÅL

H O M E

T C R             P L Å Y             4 F D   F 1

  I N   0 0 : 0 0 : 0 0 : 0 0     O U T   0 0 : 0 0 : 0 0 : 0 0

01

Ó

04

µ

58

ß

00

ƒ

 

 

 

 

 

 

 

C O N F I

o f f

Å S S E M -

B L E

o f f

I N S

T C

o f f

I N S

V I D E O

o f f

I N S

Å - C H 1

o f f

I N S

Å - C H 2

o f f

I N S

Å - C H 3

o f f

I N S

Å - C H 4

o f f

I N S

C U E

o f f

Å I N   0 0 : 0 0 : 0 0 : 0 0   Å O U T   0 0 : 0 0 : 0 0 : 0 0

P L Å Y E R

  I N   0 0 : 0 0 : 0 0 : 0 0     O U T   0 0 : 0 0 : 0 0 : 0 0

01

Ó

04

µ

58

ß

00

ƒ

Содержание DVW-500/1










































































































































































Отзывы: