Sony D910B, Руководство по обслуживанию

Страница: 25 / 135

1-15
64
Audio Setup
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC”. This affects the output from the following jacks:
– OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby
Digital” is set to “D-PCM”.
The default setting is indicated in bold print.
• 48kHz/96kHz PCM
Selects the sampling frequency of the audio signal.
The default setting is indicated in bold print.
Notes
• If you select the surround setting while playing a DVD, the player does not output the
following signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack.
– Dolby Digital signals (when you set “Dolby Digial” to “D-PCM” in “OPTIONS AUDIO”
menu)
– MPEG audio signals
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
• Even if you set “48kHz/96kHz PCM” to “96kHz/24bit”, the sampling frequency is converted
to 48 kHz/16 bit when a “SURROUND” mode (page 83) is selected.
• The analog audio signals from AUDIO OUT L/R jacks are not affected by “48kHz/96kHz
PCM” setting and keep their original sampling frequency level.
Standard Normally select this position.
TV
Makes the low sounds clear even if you turn the volume down.
48kHz/16bit The audio signals of DVD VIDEOs are always converted to
48 kHz/16 bit.
96kHz/24bit All types of signals including 96 kHz/24 bit are output in their
original format. However, if the signal is encrypted for copyright
protection purposes, the signal is only output as 48 kHz/16 bit.
65
Screen Setup
DV
D Se
ttings
and
Adjus
tme
nts
Screen Setup
“Réglage de L’écran” allows you to set the
screen according to the playback and
connection conditions.
1
Press SET UP when the DVD player is in stop
mode, then press
V/v to select (DVD)
and press ENTER.
2
Press V/v to select “Réglage de L’écran”, then
press ENTER.
3
Press V/v to select the setup item from the displayed list:
“Type TV”, “DVD LINE1 RVB Out” or “DVD S-Video Out”.
V/v/B/b
ENTER
SET UP
SET UP
ENTER
Réglage de la langue
Réglage de L’écran
Cont. Parental
Options Audio
RETURN
REGLAGE DU DVD
SET UP ENTER v V
ENTER DVD LINE1 RVB Out
Type TV
DVD S-Video Out
RETURN
REGLAGE DE L’ECRAN
SET UP v V b B
[ Oui ]
[ Non ]
[ 4:3 Letter Box ]
ENTER
continued
66
Screen Setup
Menu choices
• Type TV
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
• DVD LINE1 RVB Out
Selects the method of outputting video signals from the LINE-1 (EURO AV) jack on
the rear panel of the player.
The default setting is indicated in bold print.
• DVD S-Video Out
Selects whether or not to output S video signals from the S-VIDEO OUT jack on the
rear panel of the player.
The default setting is indicated in bold print.
4
Press
B/b
to select an item.
5
Press SET UP to exit the menu.
4:3 Letter Box Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
4:3 Pan Scan
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
Non Select this to not output RGB signals.
Oui
Select this to output RGB signals.
Oui Select this when the player is connected to a TV with S VIDEO
input jack.
Non
Select this when the player is connected to a TV lacking S VIDEO
input jack.
ENTER
SET UP
4:3 Pan Scan 4:3 Letter Box 16:9
67
Screen Setup
DV
D Se
ttings
and
Adjus
tme
nts
Notes
• Playback settings stored in the disc take priority over the “REGLAGE DU DVD” menu
settings and not all the functions described may work.
• Depending on the DVD, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan
Scan” or vice versa.
• The connection using S-VIDEO OUT jack is only for the DVD player.
• When you select “Oui” in the “DVD LINE1 RVB Out” setting, “DVD S-Video Out” is set to
“Non” automatically.
• When you select “Oui” in the “DVD S-Video Out” setting, “DVD LINE1 RVB Out” is set to
“Non” automatically.