Sony D910B, Руководство по обслуживанию

Страница: 17 / 135

1-7
32
Playing discs
Additional tasks
* If you pause the DVD player for more than 5 minutes, the DVD player will automatically
stop.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing
?/1
.
Tip
• To begin playback from the top of the disc, press
x
twice then press
H
.
2
Press
H
.
The disc tray closes and the DVD player starts playback.
The display window shows the
playback time.*
Depending on the disc, a menu
may appear on the TV screen.
For DVDs, see page 73. For
VIDEO CDs, see page 93.
* “– – – – –” appears when no disc
is loaded.
To Press
Stop play
x
Pause play
∗ X
Resume play after pause
X
or
H
Advance by frame in pause mode
C
Go to the next chapter, track, or scene
in continuous play mode
>
on the remote
Go back to the previous chapter, track,
or scene in continuous play mode
.
on the remote
Stop play and remove the disc
Z
1
While playing a disc, press
x
to stop playback.
2
Press
H
.
The DVD player starts playback from the point where you stopped the disc in
step 1.
Hour Minute Second
33
Playing discs
Ba
sic
O
p
er
at
ions
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode (DVD, VIDEO CD and CD only)
Press
m
or
M
.
For DVD or VIDEO CD, each time you press the button, the playback speed changes
as follows.
×
2
t
FF1/FR1
t
FF2/FR2
t
FF3/FR3
t
FF4/FR4 (DVD only)
t
FF5/FR5 (DVD only)
Release the button at the desired speed.
For CD, the searching speed does not change (FF2/FR2 play).
When you find the point you want, press
H
.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press
X
, then press
M
SLOW
y
. With each press, the playback speed changes
cyclically as follows.
To resume normal playback, press
H
.
Tip
• To make a video timer reservation during DVD playback, we recommend performing the
operations under “Quick Timer Recording” (page 96).
Notes
• You can change the screen type using the “REGLAGE DE L’ECLAN” menu. (See “Screen
Setup” on page 65.)
• Do not perform VIDEO playback while playing back a disc.
• If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point of the scratch or skip to the next track.
• You cannot change the MP3 or the Multi Session CD playback speed.
• VIDEO CD fast foward/reverse cannot be paused.
• During CD fast forward/reverse play, no sound is output.
Notes on playing DTS* sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be
connected to the digital jack of the DVD player.
• Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a
CD (page 82).
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Non” in
“Options Audio” menu (page 63), and may affect your ears or cause your speakers to be
damaged.
continued
34
Playing discs
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD with DTS sound tracks, set “DTS” to “Oui” in “Options Audio” menu
(page 63).
• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to
“Oui” in “Options Audio” menu (page 63). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
35
Guide to the on-screen display
Ba
sic
O
p
er
at
ions
Guide to the on-screen display
Press DISPLAY. The following information appears; type of disc, current title/track,
chapter, counter position, voice language, subtitle language and surround setting.
Refer to “DVD Audio/Subtitle Language” on page 126 for the abbreviation of the
language.
You can playback the desired title/track, chapter or counter position using this menu.
To playback the desired title/track or chapter
The title/track or chapter icon will appear on the DVD playback screen followed by
the current title/track or chapter number and the counter position.
You can check disc information during
playback.
The displayed contents differ according to
the type of disc being played.
1
Press
V/v
to select the desired item.
2
Press B/b to change the item.
3
Press ENTER to start playback.
4
Press DISPLAY or
O
RETURN to turn off the
menu.
V/v/B/b
ENTER
DISPLAY
O
RETURN
v V b B ENTER
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
Surround setting
v V b B ENTER
continued