1-29
CSPK-5000E
Configuring the System
Specifying a camera’s cable length
Use the “CABLE COMPENSATION” setting to make
up for any signal loss over the cable line connecting a
camera.
1
From the main menu, select “INPUT
CONFIGURE” and then press the SET key.
INPUT CONFIGURE
→
SOURCE ID
CABLE COMPENSATION
RECEIVER TYPE
VD
P/T LIMIT
2
Select “CABLE COMPENSATION” and then
press the SET key.
CABLE COMPENSATION
CAM TYPE
→
1 N
2 N
3 N
4 N
5 N
6 N
7 N
8 N
3
Select a camera number. If necessary, press the
NEXT or PREVIOUS key to see other pages.
4
Use the cursor keys to cycle through the options:
N, S, M, L, and LL.
See the following section for description of the
options.
5
Repeat the same procedure with other cameras.
When you are ready, press the SET key to accept
the changes.
Options and corresponding cable length
Option
N
S
M
L
LL
Cable
0-
160-
400-
700-
900-
Length
160m
400m
700m
900m
1200m
(cable type: 5C-2V)
30(EN)
Specifying the receiver type
Use the “RECEIVER TYPE” setting to specify the
type of camera in use.
1
From the main menu, select “INPUT
CONFIGURE” and then press the SET key.
INPUT CONFIGURE
→
SOURCE ID
CABLE COMPENSATION
RECEIVER TYPE
VD
P/T LIMIT
2
Select “RECEIVER TYPE” and then press the
SET key.
RECEIVER TYPE
CAM TYPE
→
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
6 NONE
7 NONE
8 NONE
3
Select a camera number. If necessary, press the
NEXT or PREVIOUS key to see other pages.
4
Use the cursor keys to cycle through the options:
NONE, STANDARD, STANDARD (PP),
MULTIPLE, and TWIST PAIR.
See the following section for description of the
options.
5
Repeat the same procedure with other cameras.
When you are ready, press the SET key to accept
the changes.
Options for receiver type
NONE:
No receiver
STANDARD:
Pelco Coaxitron
TM
receiver
STANDARD (PP): Pelco Coaxitron
TM
receiver
(preset type)
MULTIPLE:
Pelco Intercept
TM
dome camera
TWIST PAIR:
Videmech receiver
31(EN)