Sony BVP-550, Руководство по обслуживанию

Страница: 914 / 924

3-8(E)
BVP-550
Page Ver. Item Settings Contents
SKIN DETAIL SKIN DETAIL ON,
[OFF]
Turns the skin detail function on and off.
LEVEL –99 to 99 (
[0]
) Adjusts the level of the skin detail.
PHASE 100
°
to 170
°
(
[120]
) Adjusts the hue for the skin detail function.
WIDTH 0
°
to 90
°
(
[60]
) Adjusts the color width for the skin detail function.
SATURATION –99 to 99 (
[0]
) Adjusts the color saturation of the skin detail function.
GATE ON,
[OFF]
Turns the area display of the skin detail function in the viewfinder
screen.
1.10 AUTO HUE Press MENU SEL Sets the range of skin detail hue function automatically.
switch to execute. (Locate the desired skin color within the gate marker of VF and measure.)
CLEAR Press MENU SEL Sets all settings on the SKIN DETAIL page to 0.
switch to execute. (When you press MENU SEL switch, the “CLEAR” indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
GAMMA GAMMA, –99 to 99 (
[0]
) Adjusts the R, G, B and master gamma level.
R/G/B/M
COARSE 0.40,
[0.45]
, 0.50 Selects the gamma value in steps.
GAMMA
[ON]
, OFF Turns the gamma value on and off.
1.07 BLACK GAMMA –99 to 99 (
[0]
) Adjusts the black gamma (master). e)
1.07 BLACK GAMMA ON,
[OFF]
Turns the black gamma function on and off.
e)
TEST 1, 2,
[OFF]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output
CLEAR Press MENU SEL Resets all settings on the GAMMA page to the factry settings.
switch to execute. (When you press MENU SEL switch, the “CLEAR” indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
KNEE/W.CLIP POINT –99 to 99 (
[0]
) Adjusts the knee point level when the function is OFF.
SLOPE –99 to 99 (
[0]
) Adjusts the knee slope level when the function is OFF.
KNEE
[ON]
, OFF Turns the knee function on and off.
AUTO KNEE ON,
[OFF]
Turns the auto knee function on and off.
KNEE MAX ON,
[OFF]
Turns on and off the knee max function which changes the slope to
completely collapsed form.
WHITE CLIP –99 to 99 (
[0]
) Adjusts the white clip level.
WHITE CLIP
[ON]
,OFF Turn the white clip function on and off.
TEST 1, 2,
[OFF]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output
CLEAR Press MENU SEL Sets all settings on the KNEE/W.CLIP page to 0.
switch to execute. (When you press MENU SEL switch, the “CLEAR” indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
e) This function is inhibited while TALLY lamps are lit or by the setting of the System Config menu.
A noise appears on the screen during operation.
3-1. Setup Menu
3-1-2. Paint Menu