Sony BVP-550, Руководство по обслуживанию

Страница: 477 / 924

3-3(E)
BVP-550
3-1-1. Operation Menu
This menu contains items contained for changing camera settings to suit shooting conditions during
normal camera operations.
(Boxed items under “Settings” indicate the factory setting.)
Page Ver. Item Settings Contents
VF DISPLAY ZOOM
[ON]
, OFF Turns on and off the indications of zoom position and lens extender.
SHUTTER
[ON]
, OFF Turns on and off the indications of shutter speed and mode.
IRIS
[ON]
, OFF Turns the iris setting indication on and off.
AUDIO
[ON]
, OFF Turns the audio level indication on and off.
(Automatically turned OFF in connection with CCU/RCP)
TAPE
[ON]
, OFF Turns the tape-remaining indication on and off.
(Automatically turned OFF in connection with CCU/RCP)
ZEBRA ON, OFF Turns the zebra indication on and off. (Corresponds to the ZEBRA
switch of VF connected to the camera.)
MESSAGE
[ON]
, OFF Turns on and off the indication of message in changing each setting of filter,
white balance memory, gain value, DCC(auto knee) and shutter speed.
The indication is displayed within three seconds in the center of the
viewfinder screen.
MODE CHG,
[USR]
CHG : The indications of the optical filter, white balance memory and
gain value are displayed only when they differ from the standard
settings (FILTER:1B, WHITE:A, GAIN:0dB)
USR : The indications are displayed corresponding to the settings on
the VF DISPLAY page.
FILTER
*
,
[ON]
, OFF Turns the optical filter indication on and off.
WHITE * ,
[ON]
, OFF Turns the white balance memory indication on and off.
GAIN * ,
[ON]
, OFF Turns the gain value indication on and off.
MARKER CENTER
[ON]
, OFF Turns the center marker indication on and off.
SAFETY ZONE 80%, 90% , OFF Turns the safety zone marker indication on and off and selects the area
indicated by that marker.
a)
BOX CURSOR ON,
[OFF]
Turns the box cursor indication on and off.
BOX H POS -99 to 99 (
[0]
) Shifts horizontally the location of the box cursor on the screen.
BOX V POS -99 to 99 (
[0]
) Shifts vertically the location of the box cursor on the screen.
BOX WIDTH 00 to 99 (
[41]
) Sets the width of the box cursor.
BOX HEIGHT 00 to 99 (
[10]
) Sets the height of the box cursor.
a) In the 16:9 mode, the following kinds of safety zone marker can be selected in combination of the settings of “SAFETY ZONE” and
“4:3 SAFETY”.
SAFETY ZONE
80% 90% OFF
4:3
SAFETY
ON
OFF Not indicated
3-1. Setup Menu
3-1-1. Operation Menu
16:9
4:3 area
Safety
zone