Sony BVP-550, Руководство по обслуживанию

Страница: 43 / 924

3-5(E)
BVP-550
BVP-550P
Page Item Settings Contents
AUTO SETUP AUTO BLACK Press MENU SEL Starts to automatically adjust the black balance.
switch to execute.
AUTO WHITE Press MENU SEL Starts to automatically adjust the white balance.
switch to execute.
LEVEL AUTO Press MENU SEL Starts to automatically adjust the level in the internal circuits.
c)
switch to execute.
TEST 1, 2,
[OFF]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output.
DIAGNOSIS OHB
[OK]
, NG Displays a state of communication for control data between the OHB block
and CPU on AT board.
PR
[OK]
, NG Displays a state of communication for control data between the PR board
and CPU on AT board.
VA
[OK]
, NG Displays a state of communication for control data between the VA board
and CPU on AT board.
AT
[OK]
, NG Displays a state of communication for control data between the CPU and
memory on AT board.
SG
[OK]
, NG Displays a state of communication for control data between the SG board
and CPU on AT board.
DA
[OK]
, NG Displays a state of communication for control data between DA board and
CPU on AT board.
IF
[OK]
, NG Displays a state of communication for control data between IF board and
CPU on AT board.
MD
[OK]
, NG Displays a self-diagnosis result of MD board (of camera adaptor).
AU
[OK]
, NG Displays a self-diagnosis result of AU board (of camera adaptor).
TR
[OK]
, NG Displays a self-diagnosis result of TR board (of camera adaptor).
CAMERA ID ID:
[] [] [] [] [] [] []
Sets a camera ID of up to ten alphanumerics, symbols, and spaces.
ID ON BARS ON,
[OFF]
Selects whether the camera ID is mixed with a camera output signal only
in the color-bar mode, or not.
c) When executing the LEVEL AUTO, data set through the menu is all cleared and the automatic level adjustment is performed in
sequence. After the adjustment is complete, adjustment result is stored as a reference file.
1. Lens is automatically closed and the black balance is automatically adjusted.
2. The white balance is automatically adjusted using TEST 2 (3-step) signal.
n
This white balance adjustment compensates a drift of the gain of an amplifier, does not compensate color temperature for an actual
object.
The gamma and knee compensation values do not change with a lapse of time because of the digital-processing camera.
Therefore, the LEVEL AUTO adjustment does not contain the gamma and knee adjustments unlike a conventional camera.
3-1. Setup Menu