Sony BVP-550, Руководство по обслуживанию

Страница: 476 / 924

3-2(E)
BVP-550
DISP switch
ON : Displays characters and messages indicating the video camera settings and operation status.
OFF : No character or marker display appears on the viewfinder screen.
MENU : The setup menu appears on the viewfinder screen.
MENU SEL switch
Selects the menu item or setting value displayed on the viewfinder screen.
CANCEL button
Cancels the contents of a menu setting, or returns to the page select mode or TOP menu.
n
The TOP menu screen indicates the entire configuration of menu items.
To display the TOP menu, set the DISP switch to MENU (from OFF) while holding down the MENU
SEL switch.
• Basic Operation
1. Displaying the menu
To display the Operation menu, set the DISP switch to MENU.
To display the other menus than the Operation menu, first of all, the TOP menu shall be displayed.
To display the TOP menu, set the DISP switch to MENU while holding down the MENU SEL
switch. Then turn the MENU SEL switch to move the cursor to a menu item which you want and
press the MENU SEL switch.
2.
To shift the page
, turn the MENU SEL switch with a page scroll bar displayed at the top-right of the
screen until the desired page is displayed and press the MENU SEL switch.
The menu enters the item select mode and the page scroll bar disappears.
3. To shift the item , turn the MENU SEL switch until the
→
cursor points the item to be set and press
the MENU SEL switch.
4.
To change the value
, turn the MENU SEL switch. You can change the values quickly by turning
the MENU SEL switch fast. You can make very fine adjustments by turning the switch slowly. By
pressing the MENU SEL switch, the setting is entered.
5 The menu page is returned to the item select mode or page select mode every time the CANCEL
button is pressed.
6.
To exit from the setup menu
, set the DISP switch to OFF.
• ROM version
Contents in the menu and factory settings may differ from the descriptions in this manual depending on
the version of ROM (IC36) on the AT-95 board.
In this section, an item under “Ver.” in the table shows a ROM version. If any version is given, it shows
that the function for the item is added or changed, and the ROM with that version or higher version
supports the function. If no version is given, it shows that every ROM version supports the function.
To confirm the ROM version easily proceed as follows:
1. Set the DISP switch to OFF.
2. Power the unit on while holding down the MENU SEL switch. The indication of ROM version
is displayed for about three seconds.
3-1. Setup Menu