Operating Manual | 11 Warranty
SONASCREEN
88 / 89
Revision: 1.0 | 2022-03-04
11
Warranty
Condition at delivery
All products and accessories have been tested thoroughly before they leave the factory, are
state-of-the-art products at the time of delivery and adhere to all applicable safety
regulations.
Warranty
During the warranty period, SONOTEC GmbH will eliminate all deficiencies caused by
material or manufacturing faults free of charge. SONOTEC GmbH will at its own discretion
offer warranty by reparation or replacement of faulty products.
Exceptions
Internal accumulators as well as damage caused by unintended use, by wear or by
manipulation of the product are exempt from warranty. The warranty also does not cover
those faults that affect value or usability of the product to a negligible amount.
Responsibility of the user/operator
It lies within the responsibility of the users to ensure that the product has been installed and
set-up properly and is used in a manner that does not impair safe operation.
Operating errors
Operating errors can never be completely ruled out by the manufacturer. SONOTEC GmbH
is in no way liable for any direct or indirect damage caused by operating errors (e.g. damage
on software and/or hardware, damage by downtime, damage by malfunction as well as
damage or loss of measurement and test data).
Quality of captured data
The determination of valid test results, their interpretation and the actions derived therefrom
are exclusively subject to the personal responsibility of the users. SONOTEC GmbH does not
guarantee the correctness of determined test values and/or test results. SONOTEC GmbH
does not assume liability for any faults or damages that might occur due to further use of
determined test and measurement values.
