Operating Manual | 5 Performing measurements
SONASCREEN
50 / 89
Revision: 1.0 | 2022-03-04
5.3.5
Adjusting the audio output
Description
The detected sound signals are visualized in the beam picture and may additionally be
output as sound via the device's headphone socket.
Audio output focuses on the center of the field of view in the beam picture. The sound
signals occurring at this position are distinguished from the ambient noise.
Availability
It is not possible to adjust the audio output for leakage measurements.
For all other measurements, the following adjustments are available:
Icon
Description/function
Availability
Audio output activated
•
Measurement recording
•
Measurement analysis
Audio output deactivated
•
Measurement recording
•
Measurement analysis
Audio output and the local spectrum are filtered according to
the set lower and upper cutoff frequency.
•
Measurement recording
No filtering of audio output and local spectrum.
•
Measurement recording
Procedure
1
In the “Measurement” screen, tap the "Audio output" icon.
2.
Activate audio output.
3.
Set the volume by moving the slider.
4.
If necessary activate audio output filtering.
Further information
For adjustment of the audio output, please also see the description of the following screen:
•
