iii
Warranty
iii
CE Conformity
The product is shipped with the following equipment so please check to
ensure that you have all of the items below. If anything is missing, please
contact the supplier of your equipment immediately.
Item
Quan�ty
Product unit
1
IEC mains lead fi�ed with moulded mains plug
1
Handbook
1
If you require a different power lead, please let us know when ordering the
product.
Repairs & Returns
Please contact Sonifex or your supplier if you have any problems with your
Sonifex product. Email [email protected] for the repair/
upgrade/returns procedure, or for support & ques�ons regarding the
product opera�on.
Conformity
The products in this manual comply with the essen�al requirements of the
relevant European health, safety and environmental protec�on legisla�on.
The technical jus�fica�on file for this product is available at Sonifex Ltd.
The declara�on of conformity can be found at:
h�p://www.sonifex.co.uk/declara�ons
Safety & Installation of Mains
Operated Equipment
There are no user serviceable parts inside the equipment. If you should
ever need to look inside the unit, always disconnect the mains supply
before removing the equipment covers. The cover is connected to earth by
means of the fixing screws. It is essen�al to maintain this earth/ground
connec�on to ensure a safe opera�ng environment and provide
electromagne�c shielding.
Voltage Setting Checks
Ensure that the machine opera�ng voltage is correct for your mains power
supply by checking the box in which your product was supplied. The voltage
is shown on the box label. The available voltage se�ngs are 115V, or 230V.
Please note that all products are either switchable between 115V and 230V,
or have a universal power supply.
Fuse Rating
The product is supplied with a single fuse in the live conduc�ng path of the
mains power input. For reasons of safety it is important that the correct
ra�ng and type of fuse is used. Incorrectly rated fuses could present a
possible fire hazard, under equipment fault condi�ons. The ac�ve fuse is
fi�ed on the outside rear panel of the unit.
Power Cable & Connection
An IEC power connector is supplied with the product which has a moulded
plug a�ached.
The mains plug or IEC power connector is used as the disconnect device.
The mains plug and IEC power connector shall remain readily operable to
disconnect the apparatus in case of a fault or emergency.
The mains lead is automa�cally configured for the country that the product
is being sent to, from one of: