9
Front Panel Controls, Connections & Indicators
3
LS Mute Button
This bu�on mutes the audio feed to the speaker. The bu�on illuminates red
when the mute func�on is ac�ve. The opera�onal mode of the bu�on is
user configurable, see the
Audio - Monitor & Speaker Se�ngs
web page on
page 44 for details.
Mon 1 & 2 Buttons
These bu�ons ac�vate the 2 monitor channels. The monitors can be set to
provide audio from any local audio input or from an AoIP source. To
configure the monitors, see the
Audio - Monitor & Speaker Se�ngs
web
page on page 44 for details.
Power Switch
The power switch turns the unit on and off. When the unit is on, the
indicator is green. When the unit is off, the indicator is red. The power
switch can be disabled if required, see the
web page
on page 50 for details.
Microphone Input Connector
This 3 pin XLR socket is the connec�on for the microphone. The connec�ons
are as follows:
Pin 1:
Ground
Pin 2:
Microphone Phase
Pin 3:
Microphone Non-Phase
Phantom power can be supplied if required. To change the mic se�ngs, see
the
web page on page 42 for details.
Headset Connector
This 5 pin XLR socket is the connec�on for the headset. There is a parallel
headset connector on the rear panel. The connec�ons are as follows:
Pin 1:
Microphone Non-Phase
Pin 2:
Microphone Phase
Pin 3:
Ground
Pin 4:
Headphone Le�
Pin 5:
Headphone Right
Phantom power can be supplied if required. To change the headset se�ngs,
see the
web page on page 42 for details.
+48V Phantom Power Indicator
This indicator illuminates red when the phantom power supply is enabled.
To change the phantom power se�ng, see the
web page on page 42 for details.