16
Radian Motion Sensor
User Manual
Document Ref: UM-8041-C1
Issue: C - Rev 1
© Sonardyne International Limited 2007
Use the lubricant sparingly—it is sufficient to apply a bead about half the
size of a match head to each half of the connector before mating them.
Avoid exposing the connectors to heat or sunlight for extended periods.
3. Assemble the connector and screw the connection hand tight only.
4. Route the cable from Radian to the receiving equipment or a junction box.
Ensure the cable is protected against damage along its length, and does not
snag against other items of equipment. Avoid subjecting the cable to sharp
bends or points of stress. Secure the cable at regular intervals along its
length.
5. Make connections to the receiving equipment or junction box as described in
