SOMFY 1870398, Руководство по эксплуатации

Страница: 8 / 26

Motor Controller 6 AC KNX DRM
30.11.2020
Ref. 5157011A
8/ 26
No. Object designation Type DPT_ID Description
19 Motor 1 Slat position automatic 1 Byte 5.001 For Venetian blinds: If a telegram is received by
one of these communication objects, the corre-
sponding slats move to the position specified by
the value received. If a Venetian blind is moving
and a value is received by the corresponding ob-
ject, the position of the slats is only adjusted after
the movement is complete. Depending on the pa-
rameter settings on the "General" index card, the
position is defined as follows:
"100" = slats maximum closed/
"0" = slats maximum reversed
or
"0" = slats maximum closed/
"100" = slats maximum reversed
20 Motor 2 Slat position automatic 1 Byte 5.001
21 Motor 3 Slat position automatic 1 Byte 5.001
22 Motor 4 Slat position automatic 1 Byte 5.001
23 Motor 5 Slat position automatic 1 Byte 5.001
24 Motor 6 Slat position automatic 1 Byte 5.001
25 Motor 1 Position Up/Down
manual 1 Byte 5.001 If a telegram is received by one of these communi-
cation objects, the corresponding blind moves to
the position which is dependent on the value re-
ceived: "0" = upper end limit, "100" = lower end
limit.
For Venetian blinds: When the position is reached,
the slats are turned to the same position as they
were in before.
26 Motor 2 Position Up/Down
manual 1 Byte 5.001
27 Motor 3 Position Up/Down
manual 1 Byte 5.001
28
Motor 4 Position Up/Down
manual
1 Byte 5.001
29
Motor 5 Position Up/Down
manual
1 Byte 5.001
30 Motor 6 Position Up/Down
manual 1 Byte 5.001
31 Motor 1 Slat position manual 1 Byte 5.001 For Venetian blinds: If a telegram is received by one
of these communication objects, the corresponding
slats move to the position specified by the value re-
ceived. If a Venetian blind is moving and a value is re-
ceived by the corresponding object, the position of the
slats is only adjusted after the movement is complete.
Depending on the parameter settings on the "Gen-
eral" index card, the position is defined as follows:
"100" = slats maximum closed/
"0" = slats maximum reversed
or
"0" = slats maximum closed/
"100" = slats maximum reversed
32 Motor 2 Slat position manual 1 Byte 5.001
33 Motor 3 Slat position manual 1 Byte 5.001
34 Motor 4 Slat position manual 1 Byte 5.001
35 Motor 5 Slat position manual 1 Byte 5.001
36 Motor 6 Slat position manual 1 Byte 5.001
Wert (0/100)
Wert (100/0)
Value
(100/0)
Value
(0/100)
Wert (0/100)
Wert (100/0)
Value (0/100)
Value (100/0)