Motor Controller 6 AC KNX DRM
30.11.2020
Ref. 5157011A
17/
26
6.2.8 Start delay
Default value:
0 seconds
Selection options:
0
–
100 seconds
This parameter defines the necessary starting time of an electronic motor used, such as Somfy WT Motor
200 ms.
If electronic motors are controlled with this motor controller, the starting time delay of the electronic
motor must be configured in the motor controller settings in order to reach a correct slat position.
If a starting delay > 0 s is set, a motorised product in the upper end limit can not be moved upwards
again.
6.3 "Functions motor 1-6" menu index card
If the "Individual" basic setting for the motors is selected on the "General" menu index card, six individual
menu index cards (functions of motors 1-6) are visible. If the "Combined" basic setting for the motors is se-
lected on the "General" menu index card, one menu index card (functions of motors 1-6) is visible.
6.3.1 Intermediate Position 1 (IP 1)
6.3.1.1 Up/Down position (0
–100%)
Default value:
0% (function disabled)
Selection options:
0
–100%
This parameter sets the intermediate position 1 "Up/Down“. The target value in % refers to the configured
travel times of the corresponding blind on the menu index card Motor 1…6/Motor 1–6.
If the Up/Down intermediate position is set to 0%, the function is disabled.
Содержание 1870398
Страница 1: ......
Страница 26: ...Motor Controller 6 AC KNX DRM 30 11 2020 Ref 5157011A 26 26 ...