SOLZAIMA EARTH 9KW, Инструкция по эксплуатации

Страница: 21 / 119

20
come out in front of the equipment. After adjusting the position, you must remove the
accessory to keep it cool.
Figure 20 – Equipment installation
6. Installation of optional accessories.
Installing the display outside the equipment.
It is possible to install the display outside the insert. It ’s an option that allows the
installation of the display where it is most practicle, up to a maximum length of 30m
using a parallel cable with a 0.75mm2 section. In this way, the operation of the insert
can be controlled without being close to the heat source, even from another division.
This installation requires two additional components: the blind cover for the insert and
the frame to attach the display to the wall. Sufficient cable length must be left so that
the moving part of the equipment can be removed without causing strain on the cable
and does not interfere with the movement of the equipment guides. Steps for
assembly:
Once you have chosen the location where the display will be installed, you should make
a hole in the wall with the help of the plate that will support the display on the back.
Place it next on the wall, making sure it is leveled and with the help of a pencil mark
the hole as shown in the figure.