Sole Fitness 16810388 Скачать руководство пользователя | Manualshive

Страница: 4 / 36

background image

Customer Service 1-888-707-1880 Dyaco Canada Inc. 2014
email: [email protected]

4

IMPORTANT

SAFETY INSTRUCTIONS

WARNING

- Read all instructions before using this appliance.

DANGER

- To reduce the risk of electric shock disconnect your treadmill from the

electrical outlet prior to cleaning and/or service work.

WARNING

- To reduce the risk of burns, fire, electric shock, or injury to persons, install

the treadmill on a flat level surface with access to a

110-

volt, 15-amp grounded outlet

with only the treadmill plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER,
WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE
GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY
MODIFY THE CORD SET.

A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions,
page 3.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both

carpet and treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance

between the rear of the treadmill and any fixed object.

Keep children away from the treadmill. There are obvious pinch points and other

caution areas that can cause harm.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not

working properly, call your dealer.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous
environment.

Never drop or insert any object into any openings.

Do not use outdoors.

To disconnect, turn all controls to the off position, remove tether cord, then remove

the plug from the outlet.

Do not attempt to use your treadmill for any purpose other than for the purpose it

is intended.

The pulse sensors are not medical devices. Various factors, including the user’s

movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.

Use handrails provided; they are for your safety.

The pulse sensors are not intended to support the user’s weight. For support

when using the treadmill and during dismounting use the side handrails.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg
fatigue.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

«
...
2
3
4
5
6
...
»

Содержание 16810388





































Отзывы:

Нет отзывов

Похожие инструкции для 16810388

Бренд: U.N.O Fitness Страницы: 32

Бренд: ProForm Страницы: 28

Pro-Form PFTL99117.0

Бренд: ICON Health & Fitness Страницы: 32

Pro-Form City L6

Бренд: ICON Health & Fitness Страницы: 24

Бренд: Trojan Страницы: 24

Бренд: Pro-Form Страницы: 32

Бренд: LIFEFIT Страницы: 46

Бренд: NordicTrack Страницы: 34

Бренд: NordicTrack Страницы: 32

C 970 Pro Treadmill

Бренд: NordicTrack Страницы: 40

Бренд: Active Intent Страницы: 23

Бренд: SportsArt Fitness Страницы: 35

585 Perspective

Бренд: ProForm Страницы: 36

Бренд: Life Gear Страницы: 24

Бренд: Life Gear Страницы: 29

Бренд: Confidence Fitness Страницы: 9

Бренд: Cory Everson Страницы: 18

Бренд: Freemotion Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды