Customer Service 1-888-707-1880 Dyaco Canada Inc. 2014
email: [email protected]
10
3
4
#85
. 3/8” x 2T Split Washer
(6 pcs)
#99
. 5/16” x 3/4”
Flat Head Socket Bolt
(4 pcs)
#100
. 3/8”x 2-1/4” Button
Head Socket Bolt
(6 pcs)
#102
. Ø10mm × Ø19mm
× 1.5T Flat Washer (6 pcs)
#131
. Ø8mm × Ø23mm
× 1.5T Curved Washer
(4 pcs)
ASSEMBLY
STEP 3
HARDWARE
STEP 3
1. Attach the left and right Upright Tubes (
5
&
4
) to the Main
Frame (
1
). Be careful installing the right upright so that the
wire harness doesn’t get pinched or cut.
Only
hand-tighten all the bolts in this step. The bolts will need
to be completely tightened after the console is installed.
Insert three Split Washers (
85
), three Flat Washers (
102
),
and three Button Head Socket Bolts (
100
) through the
brackets (
151
&
152
) and the Upright Tubes (
5
&
4
) and into
the frame. Partially tighten with the M6 L Allen Wrench (
105
).
Attach two Curved Washers (
131
) and two Flat Head Socket
Bolts (
99
) to the front of each Upright Tube. Partially tighten
with the M5 Combination Allen Wrench & Phillips Head
Screw Driver (
104
).
ASSEMBLY
STEP 4
1. Connect the Speed Adjustment Switch W/Cable (34) with
the Speed Cable (Upper)( 36-33).
2. Connect the Incline Adjustment Switch W/Cable (35) with
the Incline Cable (Upper)( 36-34).
3. Connect the Computer Cable (33) with the Computer Cable
(Upper/Lower) (31).
