Firmware Upgrading
Update:
For ARM file:update \ARM\618.00361.00_HYB_1P_ARM_V1.01_0710.usb”;
For DSP file:update\DSP\618.00360.00_HYB_1P_DSP_V1.01_0710.usb”;
Long press for 5
seconds
Ø
Upgrade steps
Upgrade(ARM)
Cancel
>OK
Upgrade Selection
>ARM
DSP
Update(ARM)
Update
Update(ARM)
>618.00361.00_HYB_
1P_ARM_V1.01_
0710.usb
(a)
(b)
(c)
>ARM
DSP
(e)
Upgrading---------25%
(d)
U Disk
Firmware Upgrading
Upgrade/Dongle
/Upgrade
/Upgrade
BAT
74
75
2) Please contact our service support through [email protected] to
obtain the firmware, and store the firmware in the U disk according to the
following path.
Step 1.
Please save the "Upgrade" firmware in your U disk first, and press
the "Enter" button on the inverter screen for 5 seconds to enter the OFF
mode.
Step 2.
Find the "Update" port of the inverter, unplug the monitoring
module (Pocket WiFi/ Pocket LAN/Pocket 4G) by hand, and insert the USB
flash drive.
Step 3.
LCD operation, enter the upgrade interface "update", as shown
below(a): Please press the up and down keys to select ARM, then press
down to set "OK", press the enter key to enter the software version
interface;
Step 4.
Please confirm the new firmware version again and select the
firmware to upgrade. The upgrade takes about 20 seconds.
(d) When it is completed, the LCD screen returns to the "Update" page.
Содержание X1-Hybrid
Страница 59: ......
