Electrical Connection
Electrical Connection
Ø
Connecting wirings to terminal block
trip length
conduit
5mm/0.20in
wirings
Step 2 & 3
3-pin*1
Step 1
Step 1: Find the female terminal block in the accessories package.
Step 2: Choose the appropriate wire according to the specific connection.
Step : Remove 0.20in/5mm of insulation from the end of the wire.
3
Step 4: Insert stripped wires into female terminal and ensure that all
conductor strands are captured in the terminal.
Step 5: Screw down screw cap tightly.
Step 6: Plug the female terminal block into the corresponding male terminal
block on the communication board and screw in each screw tightly.
Step 4
Step 5
Step 6
38
39
