Safety
Safety
CAUTION!
Possible damage to health as a result of the effects of radiation!
Do not stay closer than 7.87in/20cm to inverter for a long time.
DANGER!
Danger to life due to high voltages in the inverter!
Before installing or using the product, read all the instructions,
cautions, and warnings in this manual.
Before connecting the product to the electrical utility grid, contact
the local utility company.
All work must be carried out by qualified electrician.
Children should be supervised to ensure that they do not play with
the appliance.
2 Safety
2.1 Important Safety Instructions
WARNING!
All electrical installations must be carried out in accordance with all
applicable Local and National Codes. ANSI/NFPA 70 or the Canadian
Electrical Code CSA C22.1.
NOTE!
“Note” provides tips that are valuable for the optimal operation of our
product.
CAUTION!
“Caution” indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
CAUTION!
Danger of burn injuries due to hot enclosure parts!
During operation, the upper lid of the enclosure and the enclosure
body may become hot.
Only touch the lower enclosure lid during operation.
Do not operate the inverter when the device is running.
WARNING!
Risk of electric shock!
WARNING!
A1-Hybrid series only support a certain type of Lithium-ion battery
(Manufacturer certified battery)!
CAUTION!
When handling battery, adhere to all manufacturer safety instructions!
WARNING!
Store away from damp and corrosive materials! (such as vitriolic acid,
hydrochloric acid, etc.)
WARNING!
This document does not replace and is not intended to replace any
local, state, provincial, including without limitation applicable in the
jurisdiction of installation. Solax assumes no responsibility for the
compliance or non-compliance with such laws or codes in
connection with the installation of the product.
Prior to installation, read this section carefully to ensure correct and safe
installation. Keep the user manual in a safe place.
Only accessories shipped with the inverter are recommended for use. Using other
accessories may result in a fire or injury to the user.
Make sure that existing wiring is in good condition and that wire is not undersized.
Do not disassemble any parts of the inverter which are not mentioned in the
installation guide. It contains no user-serviceable parts. See warranty for instructions
on obtaining service. Attempting to service the inverter yourself may result in a risk
of electric shock or fire and will void your warranty.
Keep away from flammable and explosive materials to avoid fire.
Do not install application in a corrosive environment where it may be exposed to
ammonia, corrosive gases, acids, or salts (eg: chemical plant, fertilizer storage areas,
tanneries, near volcanic ash eruption).
Authorized service personnel must use insulated tools when installing or working
with this equipment.
Never touch either the positive or negative pole of the PV connecting device. Never
touch both poles at the same time.
The unit contains capacitors that remain charged to a potentially lethal voltage after
the MAINS , battery and PV supply have been disconnected.
Hazardous voltage will be present for up to 5 minutes after disconnection from the
power supply.
03
02