Setting
Setting
a) Status
The Status function contains five items of the inverter (Grid, Solar, Charger, EPS
and Load).
Press up and down to select and press the “OK” to confirm the selection.
Press “ESC” to return to the menu.
a-1) Grid
“Grid” shows the current state of the grid, such as voltage, current, output
power, local consumption power and frequency.
“Pout” measures the output power of inverter.
“Pgrid” measures the power that is exported or imported from the grid.
“F” refers to the frequency of the inverter.
The positive value refers to the energy input to grid, the negative value refers to
the energy consumed from the grid.
Grid
Solar
Charger
EPS
Load
S
ta
tu
s
Ø
Status
Grid
Solar
Charger
Status
U
0.0V
I
0.0A
Pout
0 W
Grid
a-3) Charger
The Charger section shows the charger situation of the system, including
the battery voltage, charge or discharge current, Charge or discharge power,
battery capacity, battery temperature, BMS status and the flag of charge or
discharge limitation.
“+” indicates charging; “-” indicates discharging.
U
0.0V
I
0.0A
P
0W
Charger
U1 .0V
0
I1 0.0A
P1 0 W
Solar
a-2) Solar
The Solar section shows the real time PV condition of the system, such as
input voltage, current and power value of each PV input.
a-4) EPS
EPS will have data only when the inverter is working in the EPS mode. It will
display the voltage, current, power, frequency and other real-time data output by
EPS.
EPS
U
0.0V
I
0.0A
P
0W
54
55