Sola 600/43 Скачать руководство пользователя

Страница: 7 / 44

SAFETY INSTRUCTIONS

2.2 GENERAL SAFETY REGULATIONS

- Before starting the machine, please check the

machine is in good condition for work and is

safe for road use.

- Check that visibility is clear around the machi-

ne and there is no person in the working area.

- In thoroughfare, please observe traffic signs and

regulations.

- It is forbidden to ride on the machine or climb

into the machine when it is running.

- Before using the machine, the user must be

familiar with all operating elements.

- Please be extremely careful when coupling

and uncoupling the machine to the tractor.

- Please check that the PTO shaft is in good con-

dition and well protected. Prevent the protec-

tive tube from turning by holding both the

tube and chain provided for this purpose.

- Mount the PTO shaft’s transmission only when

the tractor’s engine is off.

- Before connecting the PTO shaft, be sure that

the danger zone surrounding the machine is

clear.

- Never leave the tractor’s driver’s seat while the

machine is in operation.

- Do not deposit external elements inside the

hopper.

- When mantaining the hydraulic system of the

seed drill, make sure that it is depressurised

and the tractor’s engine is off.

- Please regularly check the condition of the tu-

bes and hosepipes in the hydraulic system. The-

se parts age naturally and their life should not

surpass 6 YEARS. Please replace when necessary.

- During transit with the raised seed drill, block

the lowering switch. Before leaving the tractor,

lower the seed drill onto the ground and remo-

ve the tractor’s starting key.

- Always use enough supporting elements when

maintaining the machine in a raised position to

prevent the machine from lowering or falling.

- Before sowing, evaluate potential risks arising

from the terrain, such as steep slopes and a pos-

sible contact between high tension overhead

cables and the seed drill. The later could be cau-

sed by uneven ground and/or the configuration

of the seed drill’s mobile components.

2.3 LOADING AND UNLOADING INSTRUCTIONS

THESE OPERATIONS SHOULD BE PERFORMED

ONLY BY QUALIFIED AND EXPERIENCED PER-

SONNEL

LOADING AND UNLOADING THE MACHINE MUST

BE PERFORMED, IF POSSIBLE, USING A BRIDGE

CRANE.

WHEN THE SEED DRILL IS DELIVERED, IT

SHOULD BE IMMEDIATELY CHECKED TO DE-

TECT POSSIBLE DAMAGES DURING TRANS-

PORTATION OR MISSING PIECES. ONLY THE

IMMEDIATE REPORTING OF THIS TO THE DELI-

VERER WILL RESULT IN COMPENSATION.

Содержание 600/43













































Результаты поиска

Содержание 600/43

Отзывы:

Похожие инструкции для 600/43

Бренды по названию

Популярные бренды

Sola 600/43, Руководство пользователя

Результаты поиска

Содержание 600/43

Отзывы:

Похожие инструкции для 600/43

Бренды по названию

Популярные бренды