Sola 600/43 Скачать руководство пользователя страница 39

Страница: 39 / 44

WARRANTY

11- WARRANTY

MAQUINARIA AGRÍCOLA SOLÀ, S.L.

ensures the smooth functioning of any product according sold

to the technical specifications of the WARRANTY CERTIFICATE provided with each machine. Any deli-

very note accompanying the goods will eventually result in a VAT invoice. If the BUYER considers the

goods to be in warranty and they should not be invoiced, the problem will be analyzed and, if appro-

priate, your account will be credited. In order for the warranty to be valid, the WARRANTY CERTIFICATE

must be returned once it has been properly filled in by the DEALERSHIP and the BUYER.

MAQUINARIA AGRÍCOLA SOLÀ, S.L. will not be held responsible for any damage caused by misuse, or

by not checking the smooth functioning of the goods when either starting the machine or during the

sowing season (see section 3.4 USE ACCORDING TO DESIGN).

Neither the DEALERSHIP or the BUYER or the USER will be able to claim compensation to MAQUINARIA

AGRÍCOLA SOLÀ, S.L. for incidental damages such as labour costs, transport, faulty work, damages to

persons or goods, harvest loss or reduced harvest, etc.

Material exchanges or returns will be paid by the buyer with the previous consent of MAQUINARIA

AGRÍCOLA SOLÀ, S.L. OPTIONAL EQUIPMENT and SPARE PARTS which have surpassed three months

since delivery or have been manufactured ex professo, will only be accepted as an exception. Parts

eligible for warranty coverage need to be returned to the factory to be checked and eventually exchan-

ged, They need to be returned accompanied with a note explaining the problem and containing the

machine model and serial number. Warranty coverage remains subject to the decision of MAQUINARIA

AGRÍCOLA SOLÀ, S.L. Any repair which has not been approved by MAQUINARIA AGRÍCOLA SOLÀ, S.L.

will not be covered under WARRANTY.

Содержание 600/43













































Результаты поиска

Содержание 600/43

Отзывы:

Похожие инструкции для 600/43

Бренды по названию

Популярные бренды

Sola 600/43, Руководство пользователя

Результаты поиска

Содержание 600/43

Отзывы:

Похожие инструкции для 600/43

Бренды по названию

Популярные бренды