Sola 600/43, Руководство пользователя

Страница: 27 / 44

27
ELECTRONICAL CONTROLLER
8.5 TRAMLINING – C3
The displays defaults to the channels after 10 seconds
(unless the Area Total was selected).
There are 5 systems of tramlining – symmetric, asymmetric
left, asymmetric right, 10 bout and 18 bout. The tramline
bout is programmable from 1 to 15 in symmectric, asymme-
tric left and asymmetric right sequences.
Selection of asymmetric tramlining is denoted by a decimal
point of the display between the current bout number on
the left and the tramline bout number on the right. Left or
right asymmetric tramlining is selected in the programming
mode.
Manually advance the bout number
Press to advance the current bout number by 1.
Fig. 62
Stopping the bout number
Press to hold the current bout when the drill goes out
of work. the display will flash
‘STOP’
.
Press again to resume the normal bout sequence.
Fig. 63
Symmetric Tramlining Sequence
2+2 seed spouts are closed during the tramline bout only.
The instrument will beep once the beginning of the tramline
bout, and the display will continue flashing for the duration
of the bout.
Fig. 64
TRAMLINE BOUTS
5 bouts for seed drills of 6 metres
1 bouts for sprayers of 30 metres
3 4 5 1 2 3 4 5 1 2
Fig. 65
6 metres