Sola 600/43, Руководство пользователя

Страница: 22 / 44

22
ADJUSTMENTS
6.7 HARROW
Some adjustments can be performed on the harrow so that
it can adapt to all types of ground:
HEIGHT ADJUSTMENT
by operating the lower nut (1, fig. 52).
PRESSURE ADJUSTMENT
operating the tensioner’s upper nut (2, fig. 52)
Fig. 52
1
2
3
4
INCLINATION OF THE TINES
1-
Loosen the nut (3, fig. 52).
2-
Take out both the screw and the nut (4, fig. 52).
3-
Pull the bar (yellow, fig. 52) and place both the screw and
the nut in the hole (4, fig. 52).
6.8 LEVELLER
The work of the leveller is essential to obtain a uniform seed
planting depth.
The leveller can be adjusted by operating the spindles (1, fig.
53), which modify height and pressure of leveller’s three sec-
tions.
Fig. 53
1
EARTH DRAGGED BY THE LEVELLER SHOULD
NOT PROTRUDE OVER THE PLATE.
6.9 TRACK ERASER
To erase the tractor’s tracks, the seed drill is equipped with
track erasers with adjustable height.
To adjust the working depth, loosen the fixing screws, move
the track erasers vertically and fix them to the new height by
tighting the fixing screws.
6.10 HYDRAULIC TRACK MARKERS
Track markers can be adjusted in:
-
LENGTH
(horizontal spacing between disk and external
element)
-
ORIENTATION
(penetration angle)
Fig. 54
HIGH PRESSURE OIL MAY ESCAPE, PASS THROU-
GH THE SKIN AND INGRESS INTO THE BODY,
CAUSING SERIOUS INJURIES. KEEP HYDRAULIC
HOSE LINES IN GOOD CONDITION.
NEVER STAND UNDER THE TRACK DISCS OR WI-
THIN THEIR OPERATIONAL AREA.
IT IS ESSENTIAL TO FOLD THE TRACK MARKERS
BEFORE FOLDING THE MACHINE FOR TRANSIT