17
Instruction Manual / Betriebsanleitung / Livret d'Instructions / Manuale Istruzioni / Manual de instrucciones
FUTURA SERIES
ADJUSTMENTS AND FEATURES ON FUTURA SERIES
Refer to
Fig. 4.
POS. 27:
Size Display REAL CURRENT and WIRE SPEED (m/min).
POS. 28:
WIRE SPEED LED. If it flickers, regulate it using knob (
41
).
POS. 29:
Size Display:
BBT time (Burn Back Time) (See
Page 32
)
SOFT START (See
Page 33
)
TIMER (See
Page 31
)
POS. 30:
LED Preset BBT time (Burn Back Time). If it flickers, regulate it using push
button “+” “-” (
34
).
POS. 31:
LED Preset SOFT START. If it flickers, regulate it using push button “+” “-” (
34
).
POS. 32:
LED Preset TIMER. If it flickers, regulate it using push button “+” “-” (
34
).
POS. 33:
Push button to select BBT, SOFT START,TIMER.
POS. 34:
Push button for regulation BBT, SOFT START,TIMER.
POS. 35:
LED TIMER on.
POS. 36:
LED 4 times on.
POS. 37:
LED 2 time on.
POS. 38:
Test gas push button.
POS. 39:
Inch wire push button.
POS. 40:
Push button for selection 2T, 4T,TIMER cycle.
POS. 41:
WIRE SPEED regulation knob.
Alarms:
Machine is capable to reconise 2 different kind of alarms:
- Over heating alarm, will be visualised on the digital display as ”ALL HFA”.
- Water cooling failure, will be visualised on the digital display as ”ALL CFA”.
In presence of one of these alarms, it is not possible to weld.
-Over heating alarm will disapear soon as the temperature of the machine drops into its stan-
dards limits.
-Water cooling failure will disappear soon as the water level is back to its standards, and the
machine gets turned off and on again.
GB
